 | | Click image for closeup |
| Wireless Headset Mic System. Made by Shure. (MF.277426)
Unmatched performance and ease of use. Includes a Shure PGX14 Lavaliere Wireless System and an Audio-Technica AT892C MicroSet Condenser Headworn Microphone.
Shure PGX14 Lavaliere Wireless System
This system includes the PGX4 diversity receiver, PGX1 bodypack transmitter, and WL93 Series Subminiature Condenser Lavaliere Microphone. The wireless micro-miniature lavaliere mic provides full, clear sound. The PGX4 receiver has features like Automatic Frequency Selection and Automatic Transmitter Setup that get you up and running, hassle-free. Shure's patented Audio Reference Companding delivers crystal-clear sound beyond the limits of conventional wireless technology.
Audio-Technica AT892C MicroSet Condenser Headworn Microphone
The AT892C MicroSet Condenser Headworn Microphone is perfect for stage, television, and houses of worship. Inconspicuous lightweight under-ear design doesn't interfere with stage presence and provides ultimate comfort and ultrasecure fit. With a capsule diameter of just 1/10", the Audio-Technica microset provides the ultimate in low-profile, high-performance audio. Flexible, lightweight contoured loop hooks behind the ear for a secure, comfortable fit with or without glasses. Delivers the industry-standard sound quality you've come to expect from Audio-Technica. This wireless headset microphone has a rugged construction to meet the challenges of day-to-day use in production, house-of-worship, and theater settings. Features: - Shure PGX14
- Receiver
- Automatic Transmitter Setup
- Automatic Frequency Selection
- 90 selectable frequencies across 18MHz bandwidth
- 1/4 wave antennas
- Microprocessor-controlled diversity
- Channel display LED
- XLR and 1/4" outputs
Transmitter - Automatic Transmitter Setup
- Multifunction LED indicator (power, lockout, mute, low battery)
- -10dB pad
- 8 hours of continuous use with 2 AA batteries
- 18MHz operating range
Audio-Technica AT892C - Comfy, secure fit
- Minimum visibility
- Omnidirectional condenser capsule
- Super-high sound quality with maximum intelligibility and natural vocal reproduction
Specifications: - System
- Working Range: 100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference
- Audio Frequency Response +/ 2dB: Minimum: 45 Hz, Maximum: 15 kHz (Overall system frequency depends on microphone element)
- Total Harmonic Distortion (Ref. +/ 33kHz deviation, 1kHz tone): 0.5%, typical
- Dynamic Range: >100dB A-weighted
- Operating Temperature Range: 18°C (0°F) to +50°C (+122°F) Note: battery characteristics may limit this range
- Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
PGX1 Bodypack Transmitter - Audio Input Level: 10dBV maximum at "mic" gain position, +10dBV maximum at 0dB gain position, +20dBV maximum at 10dB gain position
- Gain Adjustment Range: 30dB
- Input Impedance: 1Mohm
- RF Transmitter Output: 30 mW maximum (dependent on applicable country
- regulations)
- Dimensions: 108mmH x 64mmW x 19mmD (4.25 x 2.50 x 0.75in.)
- Weight: 81grams (3oz.) without batteries
- Housing: Molded polycarbonate case
- Power Requirements: 2 AA alkaline or rechargeable batteries
- Battery Life > 8 hours (alkaline)
PGX4 Receiver - Dimensions: 40mmH x 181mmW x 104mmD (1.6 x 7.125 x 4.1in.)
- Weight: 327g (11.5oz.)
- Housing: ABS
- Audio Output Level (Ref. +/ 33kHz deviation with 1 kHz tone): XLR connector (into 600-ohm load): 19dBV, 1/4" connector (into 3000-ohm load): 5dBV
- Output Impedance: XLR connector: 200 ohm, 1/4" connector: 1kOhm
- XLR output: Impedance balanced, Pin 1: Ground (cable shield), Pin 2: Audio, Pin 3: No Audio
- Sensitivity: 105dBm for 12dB SINAD, typical
- Image Rejection: >70dB, typical
- Power Requirements: 12 18Vdc at 150mA, supplied by external power supply
AT892C Headworn Mic - Element: Condenser
- Polar pattern: Omnidirectional
- Frequency response: 20-20,000 Hz
- Open circuit sensitivity: 44 dB (6.3 mV) re 1V at 1 Pa
- Maximum input sound level: 122 dB SPL, 1 kHz at 1% T.H.D.
- Signal-to-noise ratio: 60 dB, 1 kHz at 1 Pa
- Power requirements: Voltage Range: 2.5-11V , Current Consumption: 0.1 mA typical @ 5V
- Weight: Microphone, boom & earpiece: 0.08 oz (2.4 g)
- Dimensions: Microphone: 0.32" (8.1 mm) long, 0.11" (2.7 mm) diameter; Boom: 3.87" (98.4 mm) long, 0.042" (1.07 mm) diameter
- Cable: 55" (1.4 m)
- Accessories furnished: Two windscreens; two element covers; clothing clip; moisture guard; carrying case
Break those chains that bind you onstage. Step up to wireless today! Browse Similar Items in:
Vocal Wireless Systems For The Stage
|
